Chemipro SAN 100ml

Chemipro SAN  A high foaming, final acid anionic rinse for use in the beverage and food industries.

  • Leaves tanks and equipment spotless and avoids mineral build-up
  • Not affected by organic soils
  • Only 60 sec. contact time needed!
  • Do not use on soft metals nor in CIP systems
  • Dosage: 15 – 25 ml  / 10 litres of water
  • User manual in English & Italian

Directions for use: use as a final rinse. Prior to application; remove gross food particles nd soil by pre-flush or pre-scrape and, when necessary, pre-soak. Then thoroughly wash or flush objects with a good detergent, followed by potable water. Prepare a solution of 15 – 25 ml ChemiproSan per 10 L of water ( 1 oz/5 gal to 1 oz/3 gal). Apply on surface with a cloth, mop, sponge, spray or by immersion. Spray 15-20 cm (6-8 inches) from surface and rub with a brush, cloth or sponge (cover or remove all food products). The surface must remain wet for at least 1 minute. Let air dry afterwards. Close the packaging tightly after use and store in a well-ventilated place. Keep out of reach of children. DO NOT SAN  with chlorinated cleaners as chlorine gas will result.

7.20

Product reviews (0)

There are no reviews yet.

Only logged in customers may leave a review.